Detailed Sno-Tek 24 920402 Snow Blower Specs
24
-inch
intake width
| Basics | |
|---|---|
| Main sub-category | 2-stage snow blower |
| Intake Specs | |
| Intake dimensions | 24-inch wide x 20-inch deep (height) |
| Blower type | 2-stage (Dual-stage) |
| Auger Gear Case Material | Steel Serrated, Top Load Aluminum |
| Impeller Diameter | 12" |
| Impeller Blades | 3 |
| Skid Shoes | Steel Reversible |
| Performance | |
| Throwing Distance | 40 feet |
| Fuel Tank Capacity | 0.79 gal. (Or 3L / 2.9 qts.) |
| Starter type | Recoil (or electric starter) |
| Chute / Deflector | |
| Chute Deflector Direction Change | Remote |
| Chute Rotation | 205 ° |
| Propulsion & Control | |
| Reverse Speeds | 2 |
| Interlock system | Single-hand |
| Drive system type | Disc-O-Matic |
| Axle system | Pin Lock |
| Tire Size | 13 in X 4 inches |
| Engine Block Heater | 208cc Sno-Tek |
| Other Specs & Features | |
| Manufacture product ID | 920402 |
| Warranty | 2 years |
| Commercial warranty | 0.33 years (90 days) |
| Release year | 2014 |
| Physical Specs | |
| Weight | 180lbs. |
Description:
Sno-Tek outfitted this dual-stage snow blower with a small 208cc Sno-Tek engine and labelled its throwing distance at an above-average up to 40-foot, which is rather surprising to see on a small unit. It also features standard steel-serrated augers, a top-load aluminum gear case, an all-steel dash-panel, and a polymer chute with a remote deflector. It also has a standard clearing width of 24-inches and rolls on 13" x 4" Polar Trac tires with a locking system for maneuverability.
Also called Sno-Tek 920402.